• 300PE
  • 300PE

300PE

Servo motor vertical type PUR low pressure molding machine is designed for electronics products modding. PUR hot-melt adhesive low-pressure injection process is a process in which PUR hot-melt adhesive is heated to liquid status under the condition of inhibiting chemical reaction and injected into the mold set cavity with a very low pressure, then cooled to solidify.  Then, by means of the moisture in the air and the moisture attached to the surface of the adhesive body, it can react with the chain to expand, and form the polymer with high cohesion (chemical reaction), which further significantly improves the heat resistance and low temperature resistance of the adhesive force. Then, by means of the moisture in the air and the moisture attached to the surface of the adhesive body, it can react with the chain to expand, and form the polymer with high cohesion (chemical reaction), which further significantly improves the heat resistance and low temperature resistance of the molded parts. It provides excellent adhesion strength, solvent resistance, paint resistance, heat resistance, hydrolysis resistance, etc.

Due to its high reactivity, it is widely used in automotive electronics, communications, electronics, aerospace, wires and cables, woodworking machinery, packaging industry, automotive interior decoration sealing, car lamps, windshield assembly, automotive door assembly and other industries.

Operating temperatureAmbient up to 250°C
Melting Tank300cc x 1
Clamping force0.4T
Electrical connection200~240VAC / 1 Phase / 50Hz
Power input2 kW
Min air pressure0.4-0.8 MPa
Footprint685mm x 605mm
Mould set size56mm x 60mm x 32mm
Max Mould Set Size56mm x 60mm x 32mm